top of page

KALAMA Foilboards

New E3 foilsboards shapes 

Doggy boards.jpeg

E3 Wing 
SUP 

The new Kalama Performance E3 range is designed to maximize early lift off by increasing the efficiency of the hull. Simply put, this has been achieved by elongating the subsurface footprint and eliminating all horizontal edges that increase drag at sub planning speeds.

​

CONSTRUCTION

Full carbon, high density foam molded PVC sandwich construction.

All boxes and foot strap inserts are reinforced with high density foam insets and additional carbon.

We use a resin tint finish layer resulting in a tough and paint chip free construction.

​

TIP TO TAIL (T2T) DYNAMIC HULL DESIGN

The hull is designed to minimize drag from horizontal edges at sub planning speeds.
Foiled subsurface outline to increase initial acceleration.
Progressive vertical bottom edge to promote early lift-off.
Progressive chine towards the tail reduces drag at lift-off.

​

HIGH VOLUME DESIGNS

Higher paddling efficiency
Earlier lift off through higher buoyancy
Increase stability to width ratio

​

CHINE RAILS

Promote early lift-off.
Reduce drag on touch downs.
Allow sharper turn angles without touching the water.

​

ROUNDED AND SOFT NOSE EDGES

Greater level of efficiency at sub planning speeds.
Early lift off through greater acceleration at initiation of take-off.

​

​

​

The Wing / Sup foil boards are very capable surf foiling SUP or Winging platforms.

We have grouped the Wing / SUP boards into 4 width break downs.  24's, 26’s, 28’s, 30’s.

Within each width breakdown there are three length and corresponding volume options. The intention here is for a person to be able to match a boards width, volume and  length with size, skill level and prevailing local conditions.

​

BOARD SPECIFICATIONS :

​

24'S 

  • 4’5”x 24 ”    - 46 ltr  +/- 4,9 kg

  • 4’9”x 24.5”   - 65 ltr  +/- 5,2 kg

  • 5’1”x 24.78”  - 75 ltr +/-  5,5 kg

​

26’S

  • 4’8”x 26”    - 83 ltr  +/-5,8 kg

  • 5’0”x 26.5”   - 92 ltr +/- 6,15 kg

  • 5’4”x 26.875” - 104 ltr +/- 6,55 kg

​

28’S

  • 5’2”x 28” - 105 ltr -  6,6 kg

  • 5’6”x 28.5” - 112 ltr - 6,75 kg

  • 5’10”x 28.875” -123 ltr - 7 kg 

​

30’S

  • 6’0”x 30.25” - 131 ltr +/- 7,2kg

  • 6’6”x 30.75” - 141 ltr +/- 7,85 kg

  • 7’2”x 31.75” -167 ltr  +/-  8,6 kg 

E3-28-51-Orange-Top-1.png
FoilBoards.jpeg

E3   Downwind
Prone SUP 
Wing

E3 Foil Wing / Prone / Down Wind

The Wing / Prone boards are a breakthrough in prone foil surf and foil downwind. They are also very suitable for Wing sailing.

 

The Wing / Prone boards come in 4 sizes. 5’3”, 5’9”, 6’1”, 6’5”. These boards are longer but narrower than the others prone foil boards. The additional length promotes prone wave catching and downwind bump hunting. Kind of like the longboards (or mid length shortboards) of prone foiling.

​

​

BOARD SPECIFICATIONS

​

  • 5’3”x 22” - 83 ltr  +/- 5,45 kg 

  • 5’9”x 22.5” - 95 ltr +/- 5,85 kg

  • 6’1”x 23” - 105 ltr +/- 6,15 kg

  • 6’5”x 23.5” -  116 ltr +/- 6,5 Kg

  • W 6’1”x 26” - 115 ltr +/- 6,6 Kg

  • W 6’5”x 27.5” -  130 ltr +/- 6,9 Kg

E3-WPD-Blue-top.png

Barracuda
Downwind

 

The new revolution design of downwind foiling and surf foiling board is coming. 

After a long period of tests, shapes and originals designs by Dave Kalama,

the new Barracuda will be available in 3 sizes. 

​

BOARD SPECIFICATIONS

​

  • 7'8 ” x  18 1/2   - 92  ltr  +/- 5,2 kg

  • 7'10 ”x 19 1/2  - 102  ltr  +/- 5,6 kg

  • 8'0 ”  x   21      - 111 ltr   +/- 5,9 kg 

​

Stay tuned or send us a message to be the first to preorder your Barracuda

​

Kalama Barracuda Tomo Rider.jpg
Barracuda kalama 7-8.webp
bottom of page